Beryllium Oxide

BeO

Moderators & Coolants

Density: 3.01 g/cm³

Atom density: 0.144946 atoms/b·cm

Beryllia moderator and reflector for compact reactors. Denser than graphite with excellent thermal conductivity.

Where these numbers come from

PNNL-15870 Rev. 2, "Beryllium Oxide" (id beryllium-oxide): density and full isotopic composition are taken from the compendium unchanged.

Open the compendium entry for the isotope-by-isotope table and the compendium's own notes.

Material compositions from PNNL-15870 Rev. 2 (April 2021), R.S. Detwiler, R.J. McConn Jr., T.F. Grimes, S.A. Upton, and E.J. Engel, Compendium of Material Composition Data for Radiation Transport Modeling, Pacific Northwest National Laboratory. Full report (DOI 10.2172/1782721)

Composition

Nuclide (ZAID)	Weight fraction	Atom fraction	Atom density (atoms/b·cm)
Be-9 (4009)	3.6032e-1	5.0000e-1	7.2473e-2
O-16 (8016)	6.3795e-1	4.9878e-1	7.2297e-2
O-17 (8017)	2.5827e-4	1.9000e-4	2.7540e-5
O-18 (8018)	1.4752e-3	1.0250e-3	1.4857e-4

This is the material as formulated. The cards below carry weight fractions, written negative, which is what MCNP and Serpent read as a mass basis.

Bound scattering

ENDF/B-VII.1 has a thermal scattering law for this material as formulated, so the cards attach be-o.20t o-be.20t. Free-gas scattering would misplace the thermal spectrum here.

What ENDF/B-VII.1 forced

O18 folded into O16: ENDF/B-VII.1 has no O18 evaluation (0.001475 by weight, so the spectrum does not care).

The cards keep the material's mass and atom count; a nuclide the library cannot name hands its share to one it can. That is why a card row can differ slightly from the table above.

Generated material cards

MCNP

c Beryllium Oxide
c PNNL-15870 Rev. 2, "Beryllium Oxide" - reactormc.net/nrdp/material/beo; rho =
c 3.01 g/cm3 (use -3.01 on the cell card)
c O18 folded into O16: ENDF/B-VII.1 has no O18 evaluation (0.001475 by weight,
c so the spectrum does not care).
m20    4009.80c  -0.360320  $ Be9
       8016.80c  -0.639421  $ O16
       8017.80c  -2.5827e-4  $ O17
mt20   be-o.20t o-be.20t

MCNP and Serpent cards use .80c (ENDF/B-VII.1 at 293.6 K) — renumber m1 and change the suffix to match your deck. SCONE compositions are atom densities in atoms/barn-cm with the .03 suffix matching temp 300. See the library reference before changing a suffix: the mapping is not portable between vendors.

Notes

Both atoms are bound in the lattice, so the card attaches be-o.20t and o-be.20t.

← Back to Materials Library